Longhai
1 / 1
Ultra-pure base oils: Formulated with 100% imported Class IV PAO synthetic base oils for maximum thermal stability and oxidation resistance.
Precision engineered additives: Infineum's latest high performance additive packages provide excellent wear protection and deposit control.
Seamless Cold Start: Optimal fluidity at temperatures as low as -40°F (-40°C) for immediate lubrication on startup.
Unshakable High-Temperature: Excellent thermal stability to 150°C+ to protect critical components in turbocharged and high-performance engines.
Tier IV Emissions Compliance: Low SAPS (Sulfated Ash, Phosphorus, Sulfur) formulation protects catalytic converters and DPFs.
Fuel Efficiency Optimization: Reduces internal friction and improves fuel economy by 2-3% compared to conventional SN oils.
| Specification Detail | Approved Rating / Standards |
|---|---|
| API Approved | SN Plus (with LSPI prevention) |
| ACEA Rating | A3/B4, C3 |
| Viscosity Grades | 0W-20, 5W-30, 5W-40 (ultra-wide viscosity range) |
| Special Features | Turbocharger protection, Timing chain wear reduction, Compatible with start-stop systems |
- Prevents low speed pre-ignition (LSPI) in turbocharged GDI engines.
- Resists fuel dilution in hybrid applications.
- Meets/exceeds BMW Longlife-04, MB 229.5, VW 502 00/505 00.
- Enhances piston cleanliness in high output engines.
- Sediment control 50% better than API SN minimum requirements.
- 3x better shear stability in sustained high RPM operation.
We recommend adjusting maintenance intervals depending on operating conditions:
This new generation of SN synthetic motor oils is available in the following sizes:
Class IV PAO (Polyalphaolefin) synthetic base oils provide superior thermal stability, excellent resistance to oxidation, and unmatched low-temperature fluidity, ensuring your engine is protected during extreme hot and cold operating conditions.
API SN Plus is specifically formulated to mitigate Low-Speed Pre-Ignition (LSPI) in modern turbocharged gasoline direct injection (TGDI) engines, preventing severe engine knock and potential piston damage.
Yes, our SN synthetic motor oils are fully compatible with start-stop systems and hybrid configurations, providing high resistance to fuel dilution and continuous wear protection through frequent cycles.
Under normal operating conditions, our advanced formulation offers an extended drain capacity of up to 15,000+ km or 12 months. For severe conditions, short trips, or heavy towing, we recommend a 7,000-8,000 km service interval.
Absolutely. The low SAPS (Sulfated Ash, Phosphorus, and Sulfur) formulation complies with Tier IV emissions requirements, keeping exhaust clean and preventing degradation of catalytic converters and diesel particulate filters (DPFs).
